logo rublaster.ru RUBLASTER.RU | Личный кабинет | Контакты | Доставка

Atul Tiwari Materials and Failures in MEMS NEMS


The fabrication of MEMS has been predominately achieved by etching the polysilicon material. However, new materials are in large demands that could overcome the hurdles in fabrication or manufacturing process. Although, an enormous amount of work being accomplished in the area, most of the information is treated as confidential or privileged. It is extremely hard to find the meaningful information for the new or related developments. This book is collection of chapters written by experts in MEMS and NEMS technology. Chapters are contributed on the development of new MEMS and NEMS materials as well as on the properties of these devices. Important properties such as residual stresses and buckling behavior in the devices are discussed as separate chapters. Various models have been included in the chapters that studies the mode and mechanism of failure of the MEMS and NEMS. This book is meant for the graduate students, research scholars and engineers who are involved in the research and developments of advanced MEMS and NEMS for a wide variety of applications. Critical information has been included for the readers that will help them in gaining precise control over dimensional stability, quality, reliability, productivity and maintenance in MEMS and NEMS. No such book is available in the market that addresses the developments and failures in these advanced devices.

14551.02 RUR

похожие

Подробнее

Poniatowska-Jaksch Małgorzata, Pakulska Teresa Non-Equity Modes as International Business Strategy


Non-Equity Modes are strongly developing forms of internationalisation of enterprises and are increasingly used in strategies of transnational corporations. In the literature, much attention is paid to particular forms of NEMs, there are no comprehensive studies in this field. Presented proposal is therefore an attempt to show NEMs as network internationalisation strategy, implementation of which allows transnational corporations to gain competitive advantage and strong position in global terms. One drew attention in it to the conditions for the development of NEMS under the ongoing nationalisation and digitisation of the economy, their place in the strategy in the context of strategic decisions made by corporations, network internationalisation strategy and management of defragmented global value chain. Presented considerations were embedded in various research trends, showing the complexity and multidimensional nature of NEMs, allowing TNCs to shift from management based on ownership to management based on control.

7552 RUR

похожие

Подробнее

Zongmin Ma Measurement Technology for Micro-Nanometer Devices


A fully comprehensive examination of state-of-the-art technologies for measurement at the small scale • Highlights the advanced research work from industry and academia in micro-nano devices test technology • Written at both introductory and advanced levels, provides the fundamentals and theories • Focuses on the measurement techniques for characterizing MEMS/NEMS devices

11192.55 RUR

похожие

Подробнее

Laurent Duraffourg Nanoelectromechanical Systems


This book will present the theoretical and technological elements of nanosystems. Among the different topics discussed, the authors include the electromechanical properties of NEMS, the scaling effects that give these their interesting properties for different applications and the current manufacturing processes. The authors aim to provide useful tools for future readers and will provide an accurate picture of current and future research in the field.

10446.38 RUR

похожие

Подробнее

Tsunenobu Kimoto Silicon Carbide, Volume 2. Power Devices and Sensors


Silicon Carbide – this easy to manufacture compound of silicon and carbon is said to be THE emerging material for applications in electronics. High thermal conductivity, high electric field breakdown strength and high maximum current density make it most promising for high-powered semiconductor devices. Apart from applications in power electronics, sensors, and NEMS, SiC has recently gained new interest as a substrate material for the manufacture of controlled graphene. SiC and graphene research is oriented towards end markets and has high impact on areas of rapidly growing interest like electric vehicles. This volume is devoted to high power devices products and their challenges in industrial application. Readers will benefit from reports on development and reliability aspects of Schottky barrier diodes, advantages of SiC power MOSFETs, or SiC sensors. The authors discuss MEMS and NEMS as SiC-based electronics for automotive industry as well as SiC-based circuit elements for high temperature applications, and the application of transistors in PV-inverters. The list of contributors reads like a «Who's Who» of the SiC community, strongly benefiting from collaborations between research institutions and enterprises active in SiC crystal growth and device development. Among the former are CREE Inc. and Fraunhofer ISE, while the industry is represented by Toshiba, Nissan, Infineon, NASA, Naval Research Lab, and Rensselaer Polytechnic Institute, to name but a few.

16341.4 RUR

похожие

Подробнее

Jean Cruveilhier Anatomie Descriptive, Vol. 2 (Classic Reprint)


Excerpt from Anatomie Descriptive, Vol. 2L: qui le suivirent, et surtout par rio]an./dans cette nomen la clature qui est encore généralement adoptée de nos jours, les nems des muscles sont déduits: 1° de leur situation.About the PublisherForgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.comThis book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

2227 RUR

похожие

Подробнее

Tsunenobu Kimoto Silicon Carbide. Volume 1: Growth, Defects, and Novel Applications


This book prestigiously covers our current understanding of SiC as a semiconductor material in electronics. Its physical properties make it more promising for high-powered devices than silicon. The volume is devoted to the material and covers methods of epitaxial and bulk growth. Identification and characterization of defects is discussed in detail. The contributions help the reader to develop a deeper understanding of defects by combining theoretical and experimental approaches. Apart from applications in power electronics, sensors, and NEMS, SiC has recently gained new interest as a substrate material for the manufacture of controlled graphene. SiC and graphene research is oriented towards end markets and has high impact on areas of rapidly growing interest like electric vehicles. The list of contributors reads like a «Who's Who» of the SiC community, strongly benefiting from collaborations between research institutions and enterprises active in SiC crystal growth and device development.

17684.37 RUR

похожие

Подробнее

Stefan Landis Nano Lithography


Lithography is an extremely complex tool – based on the concept of “imprinting” an original template version onto mass output – originally using relatively simple optical exposure, masking, and etching techniques, and now extended to include exposure to X-rays, high energy UV light, and electron beams – in processes developed to manufacture everyday products including those in the realms of consumer electronics, telecommunications, entertainment, and transportation, to name but a few. In the last few years, researchers and engineers have pushed the envelope of fields including optics, physics, chemistry, mechanics and fluidics, and are now developing the nanoworld with new tools and technologies. Beyond the scientific challenges that are endemic in this miniaturization race, next generation lithography techniques are essential for creating new devices, new functionalities and exploring new application fields. Nanolithography is the branch of nanotechnology concerned with the study and application of fabricating nanometer-scale structures − meaning the creation of patterns with at least one lateral dimension between the size of an individual atom and approximately 100 nm. It is used in the fabrication of leading-edge semiconductor integrated circuits (nanocircuitry) or nanoelectromechanical systems (NEMS). This book addresses physical principles as well as the scientific and technical challenges of nanolithography, covering X-ray and NanoImprint lithography, as well as techniques using scanning probe microscopy and the optical properties of metal nanostructures, patterning with block copolymers, and metrology for lithography. It is written for engineers or researchers new to the field, and will help readers to expand their knowledge of technologies that are constantly evolving.

11315.99 RUR

похожие

Подробнее

Liwei Lin Design and Fabrication of Self-Powered Micro-Harvesters. Rotating Vibrated Micro-Power Systems


Presents the latest methods for designing and fabricating self-powered micro-generators and energy harvester systems Design and Fabrication of Self-Powered Micro-Harvesters introduces the latest trends of self-powered generators and energy harvester systems, including the design, analysis and fabrication of micro power systems. Presented in four distinct parts, the authors explore the design and fabrication of: vibration-induced electromagnetic micro-generators; rotary electromagnetic micro-generators; flexible piezo-micro-generator with various widths; and PVDF electrospunpiezo-energy with interdigital electrode. Focusing on the latest developments of self-powered microgenerators such as micro rotary with LTCC and filament winding method, flexible substrate, and piezo fiber-typed microgenerator with sound organization, the fabrication processes involved in MEMS and nanotechnology are introduced chapter by chapter. In addition, analytical solutions are developed for each generator to help the reader to understand the fundamentals of physical phenomena. Fully illustrated throughout and of a high technical specification, it is written in an accessible style to provide an essential reference for industry and academic researchers. Comprehensive treatment of the newer harvesting devices including vibration-induced and rotary electromagnetic microgenerators, polyvinylidene fluoride (PVDF) nanoscale/microscale fiber, and piezo-micro-generators Presents innovative technologies including LTCC (low temperature co-fire ceramic) processes, and PCB (printed circuit board) processes Offers interdisciplinary interest in MEMS/NEMS technologies, green energy applications, bio-related sensors, actuators and generators Presented in a readable style describing the fundamentals, applications and explanations of micro-harvesters, with full illustration

10819.46 RUR

похожие

Подробнее

Комментарии